Page 46 - ITAtube Journal 1 2023

Press releases
MSG robot and checked for eccentricity
as well as internal and external ovality by means of GMS-E. This was the first time that an insufficiently homogeneous heat- ing of the press bolt was identified as the cause. Insufficiently homogeneous heating of the press bolt could be identified as the cause.
Shortly afterwards, several systems were used in steel tube production for both seamless and welded tubes within the manufacturing process. Among other things, to control the weld geometry. Today, more than 50 GMS-E installed by MSG are in use worldwide. These generate product safety for the customer, but above all an understanding of their own process.
The mode of operation
Thanks to the technology developed by MSG, the cross-section geometry was already digitized internally in 2005, far behind the deformed or burr-covered pipe ends. MSG’s robust mechanical engineering together with the know-how acquired since the company was founded in 1998 in the
manufacture of special machines for steel production resulted in a measuring system that is absolutely suitable for industrial use and stable in time. Through continuous fur- ther development, measurements can now be carried out on products at over 250°C. Partnership with ASMAG Group
“A production machine runs economical if it is designed to be durable and low-main- tenance due to a high-quality construction and if it can be monitored and optimized in the future during its life cycle by indus- trial-grade and high-precision measure- ment technology,” says Matthias Kramer Managing Partner of MSG. “In the ASMAG Group, we have found exactly this partner for sophisticated and high-tech mechanical engineering!”
For this reason, the management of both companies have agreed to further expand the cooperation. The first contacts be- tween the two companies were established three years ago and since then numerous projects have been successfully realized together.
46
ITAtube Journal May 2023