Products for metallurgical industry

  • Rollers for heat-treatment- and reheating furnaces with roller hearth, to be used by manufacture of hot-rolled sheets, tubes & pipes and other kinds of rolled steel. Rollers are manufactured of the steel grades 1.4541, 1.4841, 1.4845, GX48NiCrWSi48-28-5. Diameter of the roller shells from 140mm to 800mm,
  • Roller for discharge roller tables by manufacture of cold-rolled sheets. Rollers are manufactured of low-alloyed iron. The diameter range of the roller shells is from 200mm to 340mm.
  • Rollers for continuous casting machine (CC machine). Diameter range of the roller sleeves is within 180…340mm There are manufactured both single-layer rollers of the steel grade 1.7034, 1.7225, 1.2311, 1.6582, 14057, and more wear- resistant bimetallic ones with outer layer of the steel grades 1.2379, 1.4028, inner layer of the steel grades 15CrMoV5-9, 1.7733. 12311,1.0528.
  • Shells of the coke crushers of diameters up to 950mm of the steels 66Mn4, 1.3401.
  • Drums for hot dipped galvanizing lines of the steel 1.4429.
  • Coilers of diameters up to 600mm of the steel St 52.0 for the lines for manufacture of foils.
  • Containers of the steel 1.2542 for the tube extrusion plants.
  • Slitters of the steels 1.2542 and 60WCrV7 for tube-welding mills and slitting assemblies.
  • Hollow shafts and forming profile rollers for the sheet steel profiling lines.
  • Radiant tubes for the heat-treatment furnaces with controlled atmosphere (U-shaped, W-shaped, P-shaped) The tubes diameter range is within 100…280mm. Steels to be used: 1.4841, 1.4845, GX48NiCrWSi48-28-5.
  • Hollow billets of alloyed grades of steel of the range within 130...550mm for fabrication of tubes by means of forging, on the skew rolling mills, pilger mills and tube-extrusion assemblies, ring reeling machines.
  • Ingot molds. They are manufactured of grey and alloyed irons with heat treatment and machining. Outer diameter to be up to 1066mm.
  • » Cast details of heat-resistant steels for heat- treatment furnaces: hot riders, beams, bars, lining plates, stoods, baskets, muffles, retorts